We're shipping world wide.

IntelliDose by Autogrow

1999 SGD

Automatically manage your nutrient and pH levels, set remote alarms and data log your progress with this one simple machine!

The IntelliDose set the industry standards for auto dosing! The IntelliDose will dose up to a 8 part blend (nutrients, additives, pH adjuster), maintaining your preset EC and pH settings. Here are a few of the many features:

The large, interactive screen allows you to easily maneuver between calibrating, set points, alarms and configuration. If you can program a number into a cell phone, you can program your IntelliDose.

Solenoids are gravity-fed valves that will deliver your nutrients, additives and pH adjuster to your reservoir. Though solenoids are less expensive but still accurate valves, they can be more time-consuming to use. When using gravity-fed valves, you must have buckets of solution on a shelf at least 5’ up… this creates the chance of leaks and plumbing issues. Also, solenoids need to be cleaned every 4-6 weeks to function properly.

Peristaltic pumps, though a bit more expensive, are the better long term investment. Since the peristaltic is a pump, you can set your buckets of solution on the ground, allowing for a much larger quantity of pre-mixed solutions at one time. This also lowers the possibility of leaks and spills. Maintenance on the peristaltic pumps is minimal, usually a once a year tubing swap.

The IntelliDose has the ability to be connected to a PC, but it is not necessary. Growers should determine their own privacy level - if you don’t want your controller online or connected to a PC, it doesn’t need to be. If you want to have the benefits of data logging and scheduling, the PC is needed, but it does not have to be online. If you would like remote access and alarms, simply connecting the PC to the internet will give you this option. You choose your own comfort level!

You can use any nutrient line with the IntelliDose, liquid or powder. Simply determine your proper dilution ratios (don’t worry, we can help!) and the IntelliDose will keep the reservoir at your perfect recipe 24/7.

Using the IntelliGrow software, you can set your entire nutrient schedule up in one fell swoop, making changes if needed and saving schedules for future use. Scheduling out your nutrients allows you to make differences in your reservoir as often as needed and you don’t have to be onsite!

Using the IntelliGrow software, you can data log your nutrient levels, pH levels and reservoir temperatures endlessly. This data can be exported to Excel for further analysis if you so desire.

With the IntelliGrow software installed, there are many different options for remotely accessing your IntelliDose. You can log into the software and make changes, check your set points, enable or disable the pumps, etc. With a Twilio account, or your email accounts, you can have the IntelliGrow software text or email you if a setting goes outside your perimeters.

More Features:
Measure nutrients in EC/CF/TDS (500/640/700 scale)
User determined temperature and date format
pH lower or raise
Able to set different EC for day and night
Able to lower EC by adding water
Three types of alarms (local, PC, text)
Irrigation pump output
Fail safe dosing shut offs

8 outputs 24VDC
Nutrient measurement units EC, CF or TDS (500/640/700)
Measured range 0.00 to 9.99EC, 0.1 to 99.99CF, 0 to 7000PPM
Nutrient resolution to .01mS/cm, 0.1CF
Nutrient measurement accuracy +/-0.1EC, 1.0CF or 10PPM - Temperature compensated
Nutrient dosing range 0.00 to 5.99EC, 0.1 to 59.9CF, 0 to 4200PPM
pH resolution and accuracy - 0.1pH
pH measurement range 2pH to 12pH
pH dosing range 5 to 7 pH
Nutrient and pH dosing times settable from 1 second to 30 minutes
Dosing interval settable from 0 minutes (continuous dosing) to 30 minutes
Sequential dosing to prevent power surges
Temperature resolution and accuracy 1C/2F
Temperature range 0-50C/32-125F
Operating temperature range 0-50C/32-125F (not in direct sunlight)
Power source - mains supplied 24VDC with 120V pigtail… specify if mains voltage and pin type vary
Outputs will have the same voltage as the supplied voltage from the power pack
Nutrient sensor using DiPulseTM technique to resist fouling
Dosing shut off
if nutrient is below 0.1EC, 1.0CF, 10PPM
if pH is below 4.5 or above 8.0
if dosing effect is counterintuitive (by dosing pH lower, the measured pH goes up)
if sensor fault is detected
Supplied with 3m USB cable
Free download of IntelliGrow software

24V DC 2.5A Power Supply with universal plug
EC probe
pH electrode
Sample pot with all fittings
3m USB cable
Mounting hardware
Calibration Solutions
Instruction manual


We are a Singapore-based vertical farming/indoor farming/urban farming technology company. We specialize in ZipGrow™ towers and related products for Asia.

For Controlled Environment Agriculture (CEA) and Plant Factory With Artificial Lighting (PFAL), we provide solutions for indoor farming applications including growing systems (ZipFarm™), autodosing and LED grow lighting.

Our aim is to provide growers/farmers of any level of experience (beginner or expert) and scale (commercial/hobbyist/research), with the tools and knowledge to grow healthy, sustainable food for local communities and to run a commercially-viable operation. We allow growers to start small and scale up their operations easily through the simple, modular, smart solutions that we provide.

We promote cost-effective vertical farming solutions that maximize space and productivity; and minimize reliance on natural resources (arable land, water). We are passionate about making highly productive and sustainable farming innovations accessible and affordable to farmers/growers in Asia. Our services include system design, installation, consultation and operation.

For more information/enquiries, get in touch with us: contact@upgrownfarming.co

Upgrown Farming Asia Pte. Ltd. 2016